RMAX Oil Dipstick Handle Extension Kit
Increases usable handle length and grip for opening and closing.
Fits both RMAX and X2/X4 models
 
**Please specify when ordering, Blue or White** 

Kit includes:
High temperature polyamide (Nylon) extended handle
Stainless steel bolt hardware
Titanium coated drill bit
2.5mm Hex key

*Dipstick is not included
*Handle hydropak may contain residual water
*All hardware is made in Germany
*10 year warranty
-----------------------------
Install Instructions:
Remove old dipstick and clean thoroughly.
Place the extender over the dipstick and carefully center the extender handle on top of the dipstick.
Turn the extender to the back or nut side. This is the side you will drill from.
With the supplied drill bit, slowly & carefully, drill one hole only. You do not have to drill all the way through, only enough to mark the hole.
Remove extension and drill the marked hole all the way through.
Place the extension back onto the dipstick and fasten one side on with a bolt, washer and nut.
Next, drill the next hole all the way through.
Place the next bolt through and fasten washer and nut.
Do not over tighten bolts. A snug fit is all that is needed.
 
**Please specify when ordering, Blue or White**